Tag Archives: Trailbreaker

Sky Lynx – Transformers: Combiner Wars

Sky Lynx was a hard guy to track down. Lots of parts to Sky Reign, but it was hard to find the main body, and cool dino bird that turns into a space shuttle.

Now if you are one who hates extra parts hanging off of their plane modes, Sky Lynx is going to make you blow your top.  He is one part futuristic space shuttle, and one part legs folded up. Now this is pretty much the way he was in the G1 show as well as the toy. It is hard to make a guy like this and have him fold up all that well.

What Hasbro did do was make him fold up well within the confines of what he is. The legs virtually disappear, with the claws hiding inside of what looks to be a very large cargo bay on the bottom of the shuttle.

Once you transform him, he is really a sight to behold. A Transformer that does not have a robot mode is something a bit rare. Sky Lynx turns into a dino bird type creature. He has great movement in the head and neck area. Don’t forget about his opening mouth. His four legs also pose very well. Lastly, his tail can also be posed to some extent, raising up and down.

The directions show hims with his wings folded back, but the wings can also be posed out straight for a wider wingspan.

 

As the team leader of Sky Reign he is the biggest member of the team. He is also the only member of team Sky Reign that is a flyer, which is a good advantage over other teams that are made up of all land based vehicles.

Once together, the Sky Reign team creates an impressive Combiner. Sky Reign has a lion’s head instead of a giant robot’s head. This is just one more difference that let’s Sky Lynx stand apart from the other Combiners.

When side by side, Sky Reign has taller shoulders but a shorter head, which puts him at about the same size as other Combiners.

Sky Lynx comes with two bladed weapons that are identical. They are not of a whole lot of use to Sky Lynx since he doesn’t have hands. They are used as a tail for Sky Lynx’s dino mode, and lasers in shuttle mode. There were no directions for what to do with them in the instructions, so I put them side by side and made a double sword. I found elsewhere online that you can double up the blades and make a really long blade that is more becoming of a giant Combiner.

Advertisements

Hound – Combiner Wars – Sky Reign

Another G1 character re-imagined in the Combiner Wars line. This time around Hound is a bit more robust than a Jeep. He shares the same body, and everything but the head with Swindle. It is a funny pairing since they are both coming out at the same time, each in their own Combiner series.

In robot mode, it doesn’t take a lot to pay homage to the G1 version. Green all over with a touch of grey and some black.

He comes with two weapons. The hand/foot piece for Sky Reign, and a triple barrel blaster. The blaster has an additional plus of being able to be mounted to Hound’s shoulder via pegs at the back of the gun. This is one of the few Combiners that actually has a shoulder mounted weapon like their G1 counterpart.

The face-off of who wore it better.  Really, they are exactly the same with a new head and major paint changes.

I think Hound wins on this one since his G1 version was a stand-alone figure that was of some size, while Swindle was a part of Bruticus and on the small size.

In vehicle mode, Hound looks like a green version of Swindle. Not a lot you can do here for a redeco, as opposed to the original retool from Rook that had MAJOR changes to the body.

 

This is in no way the best vehicle mode we have seen in the Combiner Wars line, but it is okay, and it is somewhat militaristic, like we are used to seeing from Hound.

As with most of the Combiner Wars figures, most people won’t keep their robots in vehicle mode.  That is a good thing, since this one fails at getting the hand/foot anywhere near integrated into the design of the vehicle.   It works a lot better when the giant weapon is left off entirely.

It is sad to see figures all ready to go, but no Combiner leader.  I have finally found all 4 of this set’s Deluxe figures.  Where oh where is Sky Lynx?  Oh well, I am sure he will show up sooner or later.

“Come on boys.  We have captured Swindle.  Time for a photo!”


Trailbreaker – Combiner Wars – Sky Reign

Hey looks it’s Trailbreaker… or Trailcutter as we saw him last, but now back to Trailbreaker!

These Trail-guys get a lot of reuse out of their bodies. Earlier in the Combiner Wars, this body was used for Ironhide, and a heavily retooled First Aid. There were a couple of additional releases in Japan too.

This version is reminiscent of the G1 version as we have seen so many times here in the Combiner Wars. Trailbreaker is heavily colored in black with red and silver accents much like his G1 counterpart. He is missing the tall blower that stuck out above his head, and was included in Trailcutter’s design in the last iteration. I can’t say it is terribly missed in this version. I do think it would have been a cool addition to the hood of the truck to differentiate him a little more from Ironhide.

He comes with the axe, a less than impressive weapon in this lineup. A standard gun would have been much better.

In truck mode, he looks like he should. A black truck with funny rainbow 80’s coloring down the side.

The original version had a canopy over the back of the truck. Trailcutter had it too. WIth the new Trailbreaker, his hand/foot weapon acts as the canopy. Thankfully all of the hand/foot accessories are black, so it works pretty well in truck mode.

One of Trailbreaker’s hands is a cannon.  That is definitely a nod to the G1 version that had firing arms.  One of the advantages to having a cannon arm is that his Sky Reign hand/foot can be used as a giant hand.

And with that giant hand, he can wield giant weapons, like Shockwave here.

The first two parts of Sky Reign.

Vs four parts of Bruticus.  Let the battle continue!


%d bloggers like this: