Tag Archives: Spider-Man Homecoming

Vulture and Build-an-Accessory – Marvel Legends (Vulture Series)

Oh what fun. We start with the 7th figure of the wave, and give him wings to fly. I could not have asked for a better ending to the series than this.

We start with the Spider-Man: Homecoming movie version of Vulture. He is a super detailed figure. As we have seen, Hasbro goes above and beyond (for the most part) with their movie figures in the MCU. This one is no different. He has an amazing helmet with the creepy green eyes behind the visor. His suit is right out of the movie, from the furred jacket, to the harness.

He has good articulation. Not as great at Spider-Man, but then again, not many figures do. He is not a spring chicken anyway, so we would not expect Vulture to be too articulated, just enough to match a human.

He comes with the final piece (or first piece, depending on which figure you open first) of Vulture’s wings. This is the engine and wing attachment point. It is equally well detailed, and the paint is great. Compared to the two-tone paint on the rest of the wings, I was surprised by the extra touches. Nicely done.

There are no directions that come with Vulture for how to put the wings together. It takes a bit of flipping the pieces around in your hands, and look for the right and left indicators on the wings to know which side each part goes to. All together, we are talking a 23 inch wingspan, which is a 23 foot wingspan in Marvel Legends scale. To put that in perspective, a standard 4-seater Cessna has a 36 foot wingspan, so this guy’s wings are HUGE!!!

As you would expect with an accessory that comes in 7 pieces, the wings are very well articulated. They were in the movie, so it is only right that they would be in the figure.

You can recreate all of your favorite scenes from the movie, or fold in the wings to make him a little more manageable for a shelf display. Though I think I am going to show him off in all of his spread-wing glory.

I am so happy with this figure, and the wings. I think Hasbro hit it out of the park with their first build-an-accessory. They have shown that this is something they can do to change up the usual BAF, and give us some big alternatives.

Finally the team is all together. 3 movie figures, and 4 comic figures. 3 more Spider-Men for the collection, and some other good additions to the rogue gallery.

Advertisements

Spider-Man – Marvel Legends Vulture Wave

Back with the next Spider-Man. Yesterday we took a look at the homemade suit Spider-Man. Today we will take a look at the suit that Tony Stark gave to Peter Parker.

I am not a fan of the wings. They fall off too easily, and they are too short in width to allow SM to fly.

This figure is similar, but not the same as the Spider-Man we got in the Civil War 3-pack back when Civil War came out. This suit has more texture on the suit, and the paint apps are actually better.

He comes equipped with the web wings that we saw from the very first trailer with Spider-Man flying over a helicopter. And in the movie, that scene was even better with all of the context behind it.

He comes with two sets of hands, which is pretty typical for Spider-Man. One set of fists, and one set of web-flinging hands.

This version of Spider-Man has a lot more articulation than the Homemade Suit version. He has the super-jointed shoulders that allow for some very dynamic poses.

In addition, he has an alternate head that has squinty eyes. His eyes in the movie were a character of their own. I really think they took a cue from Deadpool and allowed Spider-Man to wear his mask much more and let his eyes do a lot of the talking. Very well done. If you want an unmasked version, you have to go hunt down the Spider-Man/Iron Man 2-pack to get Tom Holland’s head.

Comparing the two Spider-Men for the movie, they are very similar in height…which is what we would want. It is funny how the optical illusion of the two figures alone make the Homemade suit version look smaller.

Well, we are two figures in, and we are already almost done with the movie figures. Next up, we have a run of comic figures. Some are good, some are so-so, and one is absolutely terrible, not to mention it is missing a part. Until later…


Spider-Man (Homecoming Homemade Suit) – Marvel Legends Vulture Wave

It seems like Hasbro really has their stuff together. Waves are coming out as fast as we can find them. Finding them is the hard part sometimes. This wave I found across my 11-state road trip.

This is our first figure, and rightfully so, it is how Tony Stark found Peter in the first place. A kid running around in a hoodie and mask.

This wave is the “Vulture Wave” as you buy the parts to build Vulture’s wings from the Homecoming movie. That is a first for the Marvel Legends line. We have had many many many Build-a-Figures, but this is the first Build-an-accessory. That being said, we are talking about a set of wings that are an awe-inspiring 23 inches wide. When we are talking about 1 inch equaling 1 foot, that is a HUGE wingspan. I take pictures of my Marvel Legends on a 2 foot square diorama. I cannot even get all of the wings in the picture. That is a crazy big set of wings. But we will be getting to him. You will notice as we go along with the figures, that the wing pieces will begin to show up in the background. Each character comes with a piece. Seven figures, seven pieces.

Let’s take a look at Spider-Man, or as Tony Stark would call it, Spider-Man Mark I. When we first caught up with Spider-Man in Civil War, he was running around in this outfit. He stated that the goggles helped him to focus his senses since they were heightened and going crazy in a fight. He comes with a set of fists and his hood is down.

Spider-Man comes with a second set of hands that are web-slinging hands. They are in more of a natural pose for how a person actually does the web hands as opposed to the comics where Peter has exaggerated finger posing.

He also comes with a second hood, so he can have his hood up. Is this inspired by Spider-Gwen? Maybe. I noticed a few times in the film that he had his hood up, but generally in a fight situation the hood was down. Better to see, and no real way of keeping it on. I am glad we got two variations.

This is a great first figure for the wave. Since this is the Vulture Wave, you know Vulture is coming. We will also be looking at a new suit Spider-Man. And that is all. We do not get anyone else from the movie. Boo! This would have been a great time to get a few more movie figures in regular clothes. Shocker anyone? The rest of the wave is made up of comic characters. And believe it or not, since it is a Spider-Man wave, we will be getting 3 Spider-Men this time around. About typical with each Spider Wave.


Road Trip Finds

I was gone on a 21 day road trip with my wife and dog. We got a travel trailer and took it out on the maiden voyage. 21 days, 11 states, 4200 miles. Along the way I was able to stop in a plethora of WalMarts, Targets, a few Toys R Us’ and a couple of Walgreens. I even made it to a Fred Meyer in Oregon, which is owned by Krogers, so they had lots of Hot Wheels.

The tally of finds was:

Marvel Legends:
6 of the 7 Spider-Man Homecoming
The Walgreens Exclusive Invisible Woman
The Toys R Us Exclusive 2-pack Spider-Man and Mary Jane Watson

The Jim Lee Cyclops figure from the Warlock Series

Transformers:
Blitzwing (Voyager Class)
Octane (Voyager Class)
Bumblebee (Deluxe Movie)
Barricade (Deluxe Movie)
Berserker (Deluxe Movie)

Star Wars:
Tusken Raider (Sand People) (40th Anniversary Black Series)

Diecast:
10 Premium brands
Lightning McQueen (Target Exc)

13 Matchbox
75 Hot Wheels

 


%d bloggers like this: